Brown Air Services

Cessna 441 Conquest

The accident occurred at Blackbushe airfield following a go-around from an approach to land on runway 26. The aircraft appeared to begin the go-around normally but was then seen to bank to the left and start turning left. The turn continued through 135° of heading, at a low height, with the bank angle increasing progressively, until the aircraft crashed into trees, semi-inverted, approximately 550 meters from the runway 26 threshold. The reason for the initiation of the go-around was an unsafe main landing gear indication caused by a defective microswitch. The reasons for the subsequent loss of control could not be determined.