Cedar Rapids – McAllen

The airplane collided with a berm following a loss of directional control while landing. The airplane was on a 14 CFR Part 91 positioning flight at the time of the accident. The pilots reported that they encountered what they thought were rough spots on the runway during the takeoff roll. The captain reported that after takeoff, he called for the co-pilot to raise the gear and engage the yaw damper. The crew then noticed an unsafe gear indication for the nose gear. The captain stated they leveled off at 5,000 feet and decreased the airspeed so they could recycled the landing gear. Cycling the landing gear did not resolve the problem. The crew then requested to return to the departure airport for landing. The landing gear was extended and a gear down and locked indication for all three landing gear was observed. The captain stated that on touchdown, the co-pilot extended the spoilers and armed the thrust reversers. He stated that after the nose wheel touched down the airplane made a sharp left turn and traveled off the side of the runway through the grass. The airplane contacted a four-foot high berm prior to coming to a stop on another runway. The captain stated he attempted to taxi the airplane only to discover that they did not have any nose wheel steering. Post accident inspection revealed the seal on the nose gear strut had failed which prevented the nose gear from centering.

Flight / Schedule

Cedar Rapids – McAllen

Aircraft

Learjet 25

Registration

N252BK

MSN

25-107

Year of Manufacture

1973

Date

September 13, 2005 at 01:30 PM

Type

CRASH

Flight Type

Positioning

Flight Phase

Landing (descent or approach)

Crash Site

Airport (less than 10 km from airport)

Crash Location

Cedar Rapids Iowa

Region

North America • United States of America

Coordinates

41.9759°, -91.6704°

Crash Cause

Technical failure

Narrative Report

On September 13, 2005 at 01:30 PM, Cedar Rapids – McAllen experienced a crash involving Learjet 25, operated by Barken International, with the event recorded near Cedar Rapids Iowa.

The flight was categorized as positioning and the reported phase was landing (descent or approach) at a airport (less than 10 km from airport) crash site.

4 people were known to be on board, 0 fatalities were recorded, 4 survivors were identified or estimated. This corresponds to an estimated fatality rate of 0.0%.

Crew on board: 4, crew fatalities: 0, passengers on board: 0, passenger fatalities: 0, other fatalities: 0.

The listed crash cause is technical failure. The airplane collided with a berm following a loss of directional control while landing. The airplane was on a 14 CFR Part 91 positioning flight at the time of the accident. The pilots reported that they encountered what they thought were rough spots on the runway during the takeoff roll. The captain reported that after takeoff, he called for the co-pilot to raise the gear and engage the yaw damper. The crew then noticed an unsafe gear indication for the nose gear. The captain stated they leveled off at 5,000 feet and decreased the airspeed so they could recycled the landing gear. Cycling the landing gear did not resolve the problem. The crew then requested to return to the departure airport for landing. The landing gear was extended and a gear down and locked indication for all three landing gear was observed. The captain stated that on touchdown, the co-pilot extended the spoilers and armed the thrust reversers. He stated that after the nose wheel touched down the airplane made a sharp left turn and traveled off the side of the runway through the grass. The airplane contacted a four-foot high berm prior to coming to a stop on another runway. The captain stated he attempted to taxi the airplane only to discover that they did not have any nose wheel steering. Post accident inspection revealed the seal on the nose gear strut had failed which prevented the nose gear from centering.

Aircraft reference details include registration N252BK, MSN 25-107, year of manufacture 1973.

Geospatial coordinates for this crash are approximately 41.9759°, -91.6704°.

Fatalities

Total

0

Crew

0

Passengers

0

Other

0

Crash Summary

The airplane collided with a berm following a loss of directional control while landing. The airplane was on a 14 CFR Part 91 positioning flight at the time of the accident. The pilots reported that they encountered what they thought were rough spots on the runway during the takeoff roll. The captain reported that after takeoff, he called for the co-pilot to raise the gear and engage the yaw damper. The crew then noticed an unsafe gear indication for the nose gear. The captain stated they leveled off at 5,000 feet and decreased the airspeed so they could recycled the landing gear. Cycling the landing gear did not resolve the problem. The crew then requested to return to the departure airport for landing. The landing gear was extended and a gear down and locked indication for all three landing gear was observed. The captain stated that on touchdown, the co-pilot extended the spoilers and armed the thrust reversers. He stated that after the nose wheel touched down the airplane made a sharp left turn and traveled off the side of the runway through the grass. The airplane contacted a four-foot high berm prior to coming to a stop on another runway. The captain stated he attempted to taxi the airplane only to discover that they did not have any nose wheel steering. Post accident inspection revealed the seal on the nose gear strut had failed which prevented the nose gear from centering.

Cause: Technical failure

Occupants & Outcome

Crew On Board

4

Passengers On Board

0

Estimated Survivors

4

Fatality Rate

0.0%

Known people on board: 4

Operational Details

Schedule / Flight

Cedar Rapids – McAllen

Flight Type

Positioning

Flight Phase

Landing (descent or approach)

Crash Site

Airport (less than 10 km from airport)

Region / Country

North America • United States of America

Aircraft Details

Aircraft

Learjet 25

Registration

N252BK

MSN

25-107

Year of Manufacture

1973