Blairstown - Teterboro

Aero Commander 560E, N3827C (27C) was returning from Blairstown where it had been flown for minor maintenance. The pilot was on an IFR flight plan, cleared by New York tracon to proceed at 2,000 feet msl on a radar vector of 170° for an ILS approach to the Teterboro Airport. The aircraft was equipped with an altitude encoding transponder that was being used. The pilot was advised of numerous targets at his 12 o'clock position. At approximately the same time, Cessna 182Q, N96402 (402), was on a flight from the Kupper Airport to Ramapo Airport. A direct route between these airports would have intersected the nw edge of the New York TCA where positive control began between 1,800 and 7,000 feet msl. The pilot was proceeding VFR with no flight plan and was not in radio communication with any ATC facility. 402 was equipped with a transponder that was operating, but had no altitude encoding capability. As the aircraft converged, 402 was on a northeasterly heading. The planes collided about 1 mile inside the TCA. Then impacted the ground approximately 1,500 feet apart. A map was found in 402 with a line drawn between the airports and intersecting the TCA. All three occupants in both aircraft were killed.

Flight / Schedule

Blairstown - Teterboro

Registration

N3827C

MSN

560-0744

Year of Manufacture

1959

Operator

Alfred Wonesh

Date

November 20, 1982 at 04:14 PM

Type

CRASH

Flight Type

Ferry

Flight Phase

Landing (descent or approach)

Crash Site

Plain, Valley

Crash Location

Livingston New Jersey

Region

North America • United States of America

Coordinates

40.7959°, -74.3149°

Crash Cause

Human factor

Narrative Report

On November 20, 1982 at 04:14 PM, Blairstown - Teterboro experienced a crash involving Rockwell Aero Commander 560, operated by Alfred Wonesh, with the event recorded near Livingston New Jersey.

The flight was categorized as ferry and the reported phase was landing (descent or approach) at a plain, valley crash site.

2 people were known to be on board, 2 fatalities were recorded, 0 survivors were identified or estimated. This corresponds to an estimated fatality rate of 100.0%.

Crew on board: 1, crew fatalities: 1, passengers on board: 1, passenger fatalities: 1, other fatalities: 0.

The listed crash cause is human factor. Aero Commander 560E, N3827C (27C) was returning from Blairstown where it had been flown for minor maintenance. The pilot was on an IFR flight plan, cleared by New York tracon to proceed at 2,000 feet msl on a radar vector of 170° for an ILS approach to the Teterboro Airport. The aircraft was equipped with an altitude encoding transponder that was being used. The pilot was advised of numerous targets at his 12 o'clock position. At approximately the same time, Cessna 182Q, N96402 (402), was on a flight from the Kupper Airport to Ramapo Airport. A direct route between these airports would have intersected the nw edge of the New York TCA where positive control began between 1,800 and 7,000 feet msl. The pilot was proceeding VFR with no flight plan and was not in radio communication with any ATC facility. 402 was equipped with a transponder that was operating, but had no altitude encoding capability. As the aircraft converged, 402 was on a northeasterly heading. The planes collided about 1 mile inside the TCA. Then impacted the ground approximately 1,500 feet apart. A map was found in 402 with a line drawn between the airports and intersecting the TCA. All three occupants in both aircraft were killed.

Aircraft reference details include registration N3827C, MSN 560-0744, year of manufacture 1959.

Geospatial coordinates for this crash are approximately 40.7959°, -74.3149°.

Fatalities

Total

2

Crew

1

Passengers

1

Other

0

Crash Summary

Aero Commander 560E, N3827C (27C) was returning from Blairstown where it had been flown for minor maintenance. The pilot was on an IFR flight plan, cleared by New York tracon to proceed at 2,000 feet msl on a radar vector of 170° for an ILS approach to the Teterboro Airport. The aircraft was equipped with an altitude encoding transponder that was being used. The pilot was advised of numerous targets at his 12 o'clock position. At approximately the same time, Cessna 182Q, N96402 (402), was on a flight from the Kupper Airport to Ramapo Airport. A direct route between these airports would have intersected the nw edge of the New York TCA where positive control began between 1,800 and 7,000 feet msl. The pilot was proceeding VFR with no flight plan and was not in radio communication with any ATC facility. 402 was equipped with a transponder that was operating, but had no altitude encoding capability. As the aircraft converged, 402 was on a northeasterly heading. The planes collided about 1 mile inside the TCA. Then impacted the ground approximately 1,500 feet apart. A map was found in 402 with a line drawn between the airports and intersecting the TCA. All three occupants in both aircraft were killed.

Cause: Human factor

Occupants & Outcome

Crew On Board

1

Passengers On Board

1

Estimated Survivors

0

Fatality Rate

100.0%

Known people on board: 2

Operational Details

Schedule / Flight

Blairstown - Teterboro

Operator

Alfred Wonesh

Flight Type

Ferry

Flight Phase

Landing (descent or approach)

Crash Site

Plain, Valley

Region / Country

North America • United States of America

Aircraft Details

Registration

N3827C

MSN

560-0744

Year of Manufacture

1959