National Test Pilot School

Douglas DC-3

During the takeoff roll, the airplane began to drift to the right. Despite the certified flight instructor's and student's attempts, they were unable to stop the yaw and drift. As the airplane was about to depart the runway, the pilots did not reduce the throttles or apply brakes as they felt that it would be safer to attempt to get airborne. After departing the runway surface, the airplane collided with a series of berms, which sheared off the left landing gear and left engine. The right landing gear collapsed, and the airplane came to rest in a nose down attitude. Post accident e examination revealed that the student pilot had inadvertently set the rudder trim to the full right position when he adjusted the rudder pedals during the prestart checks. The rudder trim was in the full right position for the takeoff, and found in the same position upon post accident inspection.